Design and specifications are subject to change without notice.
Remote Control
The remote control is based on both 2.4 GHz and
Infrared.
The remote control is equipped with LED
indicators. The
RED
indicator states that the
remote is in
Infrared
mode and the
BLUE
indicator is for
2.4 GHz
mode. Recent products
from SWEDX uses 2.4 GHz receivers.
The 2.4 GHz technology allows the remote to
control the TV without targeting it because the
receiver is built inside the TV. Each SWEDX TV
has a pre-configured remote control meaning that
if you have several SWEDX TVs then the remote
control for one of the TVs will function only with
that particular TV and not with the other TVs.
To switch between Infrared and 2.4 GHz mode
press and hold the
buttons for 5 seconds. The Red LED will flash 3
times and switch from the current mode to the
other one.
To pair the remote with the TV follow the steps
below
1.
Connect the product (e.g screen) to
power outlet
2.
Make sure that the remote is in 2.4 GHz
mode
3.
Press and hold the
buttons on the remote control simultaneously for
about 5 seconds. The BLUE LED will flash 5
times indicating that the remote is now paired
with the TV.
Recent 2.4 GHz based products from SWEDX
are equipped with a pairing key in order to avoid
pairing more than one product when more than
one SWEDX products is close by. A On/Off key is
also available in recent SWEDX products.
If your product is equipped with paring key please
press and hold the paring key for 2 second when
the Blue LED light is flashing after pressing
On/Off Key
Pairing Key
07
