12 Swedstyle Memory T
Swedstyle Memory T 13
Version B (Auto-Movement with double-click function):
INFO
The double-click function is available only for Table Systems sold in US markets.
INFO
If you press any Key while the table moves to a Memory Position, the Table Top will stop
moving immediately. To continue, you must select the Memory Position again.
CAUTION. Risk of minor or moderate injury through unauthorized modifications
The firmware is delivered with a deactivated double-click function. If you activate this function,
the grading of the safety functions according to EN ISO 13849-1 PL b, Category B, are no longer
valid, as the legal requirements in the standard are no longer met.
•
If you activate the function, perform a new risk new assessment to meet the higher safety
requirements (EN 60335-1).
•
Swedstyle is not liable for injuries or damage caused by activating the doubleclick function
1.
Double-click the required Memory Position Key (e.g. 2)
The table will move to the Memory Position. You do not have to hold the Key
2.
The display shows the Table Top height (e.g. 73 cm)
5.4 Key lock
CAUTION. Risk of minor or moderate injury through uncontrolled movement
When attempting to activate the Key Lock, pressing the Handset too forcefully may cause the
table to move unexpectedly. Failure to anticipate the table’s movements may lead to minor or
moderate injury through crushing.
•
Do not press the Handset too forcefully while activating the Key Lock
INFO
The Handset must be turned on for the Key Lock to be activated. To activate a locked
Handset, press any key.
INFO
The Key Lock is available as standard.
Activating the Key Lock prevents you from moving the table if you accidentally press a Key.
The Key Lock can be activated and deactivated by swiping across the bottom edge of the
Handset. Alternatively, swipe horizontally across the left or right-hand side of the Handset.
The display must be active for you to activate the Key Lock. To activate an inactive display,
press any Key.
5.5 Locked handset
After you have activated the Key Lock, a key is displayed on the screen.
6
ADDITIONAL INFORMATION
6.1 Disassembly
To disassemble your Handset, ensure that it has been disconnected from the Power Unit.
Then, follow the assembly instructions in reverse order.
6.2 Maintenance
The hand controll is maintenance-free for their entire service lifetime.
WARNING. Risk of death or serious injury through electric shocks and other hazards
Using a Handset alongside unauthorized spare or accessory parts may lead
to death or serious injury through electric shocks and other hazards.
•
Only use accessory parts produced or approved by Swedstyle
•
Only use replacement parts produced or approved by Swedstyle
•
Only allow Skilled Persons to perform repairs or install accessory parts
•
Contact customer services immediately if the system malfunctions
The use of unauthorized spare or accessory parts may cause system damage. Warranty
claims are void in this scenario.
7 OPERATION
CAUTION
Risk of minor or moderate injury through uncontrolled movement
The table may not always stop exactly at the expected position. Failure to anticipate the
table's movements may lead to minor or moderate injury through crushing.
•
Wait until the system has completely stopped before attempting to use the table
CAUTION
Risk of minor or moderate injury through unsecured objects
body parts. This may lead to minor or moderate injury through crushing.
•
Ensure loose objects are kept away from the edge of the table
•
Do not leave unnecessary objects on the table during movement
CAUTION
Risk of minor or moderate injury through crushing
Failure to release Handset Keys correctly may result in the table failing to stop properly.
This may lead to minor or moderate injury through crushing.
•
•
Disconnect the system immediately if any Handset Key becomes stuck
INFO
The technology within the Handset may be interrupted by external interferences
during operation. This may lead to certain user inputs (i.e. button presses) not being
recognized.
This section of the Operating Manual contains a selection of instructions for operating the Table System
to which the TOUCH Handset is connected. TOUCH Handsets are compatible with a large number of
LOGICDATA Control Boxes. Before using the Table System, you must also read the Operating Manual for
the installed Control Box, including all relevant safety information, in full.
Handset Keys are represented as follows for further description:
UP Key
DOWN Key
SAVE Key
Memor y Position Key 1
Memory Position Key 2
Memory Position Key 3
Mem ory Position Key 4
SAVE
1
2
3
4
TOUCH FAMILY - OPERATING MANUAL // PAGE 23
7.1 ADJUSTING THE TABLE TOP HEIGHT
CAUTION
Risk of minor or moderate injury through crushing
Your fingers may be crushed when you attempt to change the height of the table
• Keep fingers away from moving parts
• Ensure that no persons or objects are in the table's range of motion
INFO
The Table Top will move up or down until the UP or DOWN Key is released, or if a pre-de-
fined stopping point has been reached.
To move the Table Top UP:
Press and hold the UP Key until the desired height has been reached
To move the Table Top DOWN:
Press and hold the DOWN Key until the desired height has been reached
7.2 SAVING A MEMORY POSITION
This function saves a set Table Top position. One Memory Position can be saved per Memory Position Key.
1. Move the table to the desired height
▸ The display shows the Table Top height (e.g. 73 cm)
SAVE
2. Press the SAVE Key.
2
3. Press the Memory Position Key (e.g. 2)
▸ The display shows S 2
7 3
▸ After about two seconds, the Table Top height is displayed again
7 3
s 2
MANUAL
Document Version 2.0 / October 2019
TOUCH
family
Valid for:
• TOUCHfx
• TOUCHdown
• TOUCHinlay
ACTIVATING THE KEY LOCK
TOUCH FAMILY - OPERATING MANUAL // PAGE 25
7.4 KEY LOCK
CAUTION
Risk of minor or moderate injury through uncontrolled movement
When attempting to activate the Key Lock, pressing the Handset too forcefully may
cause the table to move unexpectedly. Failure to anticipate the table's movements may
lead to minor or moderate injury through crushing.
• Do not press the Handset too forcefully while activating the Key Lock
INFO
The Handset must be turned on for the Key Lock to be activated. To activate a locked
Handset, press any key.
INFO
The Key Lock is only available as standard on certain models of the TOUCHfx and
TOUCHdown. On other models it can be activated during parameterization. Check the
Order Code for your Handset to see if Key Lock is activated as standard.
Activating the Key Lock prevents you from moving the table if you accidentally press a Key. The Key Lock
can be activated and deactivated by swiping across the bottom edge of the Handset. Alternatively, swipe
horizontally across the left or right-hand side of the Handset (figure 5, Activating the Key Lock). The display
must be active for you to activate the Key Lock. To activate an inactive display, press any Key.
Fig. 13: Activating the Key Lock (example TOUCH-FX)
After you have activated the Key Lock, a key is displayed on the screen.
Fig. 14: Locked Handset
