INSTRUCTION BOOKLET
INSTRUCTION BOOKLET
6
CLEANING THE HEPA FILTER
Periodically, you will need to clean the HEPA filter as it may become clogged with dust and debris.
1. Turn the product off at the power point.
2. Release the two plastic clips situated on either side the drum by pushing them in an outward direction.
3. Lift motor section of the vacuum cleaner out and sit it upside down.
4. Turn the white locking knob on the bottom of the HEPA filter counter-clockwise until it clicks and comes undone.
5. Pull off the HEPA filter.
6. Clean the HEPA filter using compressed air by placing the nozzle inside the filter and blowing outwards through the
filter until it is free of debris.
7. Re-install the HEPA filter by placing back over the filter mount. Once it is sitting in place, turn it clockwise while
applying downwards pressure until it aligns with the locating pins and becomes flush with the black mounting plate.
8. Re-install the white locking knob by turning it clockwise until tight.
We highly recommend using compressed air because when cleaned with water, it needs to be dried in a warm, dry
place for 14 days prior to re-use.
