INSTRUCTION BOOKLET
INSTRUCTION BOOKLET
4
INSTRUCTIONS
TO USE AS A STANDARD VACUUM CLEANER
1. Insert the end of the flexible grey hose into the front portal of the vacuum cleaner until the two rings touch together.
2. Twist clock-wise until the hose is locked in place.
3. Plug in the vacuum cleaner
4. Turn on via the switch on the top of the vacuum.
EMPTYING THE VACUUM CLEANER
After each application, the drum will need to be emptied.
1. Turn the product off at the power point.
2. Release the two plastic clips situated on either side the drum by pushing them in an outward direction.
3. Lift motor section of the vacuum cleaner out
4. Clear all debris out of the drum
5. Wipe down with a damp cloth (if required)
6. Reassemble vacuum cleaner
It is important when you reassemble the vaccum cleaner, that the black guard covering one side of the HEPA Filter is
FACING the air intake. Please note, the vacuum will only reassemble this way.
TELESCOPIC ARM ADJUSTMENT
Depending on your height and reach, you may want to adjust the telescoping arm to suit your application.
1. Turn the product off at the power point.
2. Push the black release switch down toward the extension piece.
3. Adjust to your desired length and release the switch. The extension piece will click into place.
REDUCTION OF SUCTION
You may wish to reduce the level of suction. To do so:
1. Slide the covering backwards on the black vented section at the end of the flexible hose, revealing the vents.
2. To increase suction again, simply slide the covering forward over the vents.
