Notes:
Messages may be delivered to the Hive out of sequence. It’s suggested if ordering is vital, for
customers to add their own timestamp or sequence number.
The
AI
,
HD
and
ET
parameters are optional but must occur before the
<data>
portion of the
command.
<appID>
is the application ID tag for the message. If this option is not specified the message
will be sent with application ID 0.
HD
and
ET
affect the time when a message has expired and is no longer considered available to
transmit. If neither
HD
or
ET
option is present, the default hold time of
172800
seconds (48
hours) will be used. If both options are specified, the
<hold_dur>
will be ignored. The outgoing
message queue is scanned periodically and messages may be removed from the outgoing
queue at any time after the expiration time has passed without notice.
Application ID Value
Description
0
to
64999
The application ID tag for the message. Swarm reserves the
use of application IDs between 65000 to 65535.
<hold_dur>
is the number of seconds to hold the message if it has not been sent before
expiring it from the outgoing message queue..
Hold Duration Value
Description
60
to
34819200
(13 months)
The message will be considered expired if not sent within the
specified number of seconds. The maximum duration is 13
months from the current time.
© 2022 SWARM TECHNOLOGIES
SWARM M138 MODEM PRODUCT MANUAL · REV 1.20 · FEBRUARY 2022
PAGE
76
