User Manual
1
1
1
1
1
Introduction
Introduction
Introduction
Introduction
The SW300 is an ADSL access device that supports multiple line modes. It
provides one 10/100Base-T Ethernet interface at the user end. The device
provides high-speed ADSL broadband connection to the Internet or Intranet for
high-end users, such as net bars and office users. The device provides high
performance access to the Internet, downlink up to 24 Mbps and uplink up to 1
Mbps.
1.1
1.1
1.1
1.1 Safety
Safety
Safety
Safety Prec
Prec
Prec
Precautions
autions
autions
autions
Follow the following instructions to prevent the device from risks and damage
caused by fire or electric power:
�
Use volume labels to mark the type of power.
�
Use the power adapter packed within the device package.
�
Pay attention to the power load of the outlet or prolonged lines. An
overburden power outlet or damaged lines and plugs may cause electric
shock or fire accident. Check the power cords regularly. If you find any
damage, replace it at once.
�
Proper space left for heat dissipation is necessary to avoid damage
caused by overheating to the device. The long and thin holes on the device
are designed for heat dissipation to ensure that the device works normally.
Do not cover these heat dissipation holes.
�
Do not put this device close to a place where a heat source exits or high
temperature occurs. Avoid the device from direct sunshine.
�
Do not put this device close to a place where it is over damp or watery. Do
not spill any fluid on this device.
�
Do not connect this device to any PCs or electronic products, unless our
customer engineer or your broadband provider instructs you to do this,
because any wrong connection may cause power or fire risk.
�
Do not place this device on an unstable surface or support.