Swaraj SW300, User Manual, Page: 36 / 91

User Manual
33
3.5.1.1 3.5.1.1 3.5.1.1 3.5.1.1 Static Static Static Static Route Route Route Route
Choose Advanced
Advanced Advanced
Advanced > Route
Route Route
Route > Static
Static Static
Static Route
Route Route
Route , and the page is shown as the
following figure appears. This page is used to configure the routing information.
You can add or delete IP routes.
The following table describes the parameters and buttons of this page:
Field Field Field Field Description Description Description Description
Enable Select it to use static IP routes.
Destination Enter the IP address of the destination device.
Subnet Mask Enter the subnet mask of the destination device.
Next Hop Enter the IP address of the next hop in the IP route to the
destination device.
Metric The metric cost for the destination.
Interface The interface for the specified route.
Add Route Click it to add the new static route to the Static Static Static Static Route Route Route Route
Table
Table Table
Table .
Update Select a row in the Static Static Static Static Route Route Route Route Table Table Table Table and modify the
parameters. Then click it to save the settings temporarily.