swaploader SL-222, Parts And Operation Manual

Page: 37 / 128

SL-222.INS
2-15
09/2009
P.T.O. SELECTION
The next step is to select and install a direct drive type P.T.O. to the transmission. Please contact
your local truck equipment representative for the correct unit sized on the following criteria:
P.T.O. Torque Rating:
200 ft.-lbs. (See Note 1)
Power at 1500 RPM:
47 H.P. (See Note 1)
Output
Flange: SAE B 4 Bolt
Hydraulic Pump Spined Shaft Specifications:
7/8 – 13T 16/32 D.P.
Hydraulic Pump Rotation:
L.H. As provided (See Note 2). The
hydraulic pump rotation can be reversed to
R.H. by a qualified hydraulic technician or it
can be sourced through Swaploader.
Ratio of Pump RPM to Engine RPM:
80% to 100%
NOTE 1: P.T.O. torque and power requirements are based on the unit operating at main
relief pressure. Normal operating pressure will be less.
NOTE 2: P.T.O. output rotation will need to be R.H. (clockwise) as viewed looking at
output flange of P.T.O. for a L.H. Pump.
NOTE 3: Do not operate pump at speeds over 1500 R.P.M.
NOTE 4: Always disengage the P.T.O. after each operating cycle.