swaploader SL-220, Parts And Operation Manual

Page: 28 / 128

SL-220.INS
2-6
09/2009
CONTROLS INSTALLATION - MANUAL
1. Attach the valve mount bracket (Pt. No. 10H51) to the mainframe as indicated on Dwg.
No. 90H30 with the fasteners provided.
2.
Mount the hydraulic control valve assembly (Pt. No. 20P39) to the valve mount bracket
as shown on Drawing No. 90H30 with the fasteners provided.
3.
Install the hydraulic adapters and connect the hydraulic hoses and tubing (Pt. Nos. 10P73,
11P98, and 11P99) to the control valve assembly as indicated on Drawing No. 90H97.
The tubing should be supported by the clamp assemblies that are provided in the Loose
Parts Box (See Drawing 52H32).
4.
Determine the best location in the cab for the control levers (Pt. No. 20P08). The
location should be such that the controls can be easily reached while operating the truck.
A control lever console (Pt. No. 20P09) is provided to facilitate the mounting of the
control levers.
5.
Assemble and install the control lever console (See diagram below). Typically the
console is fastened to the floor of the cab and the control cables are routed through
additional holes drilled in the floor. Your particular installation may require that
additional brackets be fabricated or other modifications made.