![background image](http://html.mh-extra.com/html/swap/smart-watch-and-phone/smart-watch-and-phone_user-manual_1412557014.webp)
1
Using the Bluetooth headset
The supplied Bluetooth headset allows
you to hear and speak discretely without
need for wires. See also the
Settings
section for more Bluetooth information.
Charging the headset
Charge the headset from a standard
USB port. It needs two hours for a full
charge. The indicator shows red while
charging and goes out once completed.
Turning the headset on and off
Press and hold the button until the in-
dicator responds. As it switches
on
, you
will see four
blue
flashes. As it switches
off
, you will see four
red
flashes. When
it is on, the indicator will flash blue once
every three seconds (if unpaired) or once
every twelve seconds when paired with
your sWaP watch. Once paired, the two
devices will always re-locate each other.
Pairing your sWaP and headset
Before they will work together, you need
to form a pairing bond between them.
This needs to be done only once.
1 Ensure that the headset is initially
switched off. Press and hold its button
for roughly eight seconds (ignore the
initial blue flashes) until the indicator
flashes red and blue, then release.
2 On your sWaP watch, from the clock
face, tap
Menu
or press the lower
button.
3 Tap
(twice, if necessary).
Button:
power
and
control
Earpiece
Charging
base
Connector
cover
Indicator
Ear hook
USB
port