9
EN
MOUNT THE CAMERA
Follow these steps to mount the floodlight camera. We recommend pairing the floodlight camera
before permanently mounting it on the wall to ensure it is working properly. See "
SET UP THE
CAMERA
" on page 7 for pairing instructions.
NOTE: BEFORE MOUNTING, ENSURE THE INSTALLATION LOCATION IS WITHIN RANGE OF YOUR CURRENT WI-FI SIGNAL.
SEE "GETTING STARTED" ON PAGES 4-5 FOR INFORMATION ON HOW TO CHECK WI-FI COVERAGE.
1
Detach the mounting bracket from the base of the floodlight camera by pressing the release latch
on the bottom of the mounting bracket and then sliding it off.
2
Hold the mounting bracket against the wall and mark the location of the four screw holes.
3
If mounting on a masonry surface or drywall, drill holes and insert the wall plugs provided.
4
Fix the mounting bracket securely to the wall using the screws provided.
5
Re-attach the floodlight camera by sliding the base down onto the mounted bracket until it snaps
into place.
6
Plug the power cord of the floodlight camera directly into a wall power outlet and switch the
power on. Do not use a double adapter or power board for the floodlight camera.
7
Check the camera’s view by looking at the live stream in the Swann Security app. Tilt and swivel
the camera to adjust the viewing angle, if necessary.
NOTE: PLEASE ENSURE THE MOUNTING BRACKET IS MOUNTED ON A SECURE AND STABLE WALL CAPABLE OF SUPPORTING
THE FULL WEIGHT OF THE UNIT.