4
EN
•
Before mounting the camera permanently, it is important that you confirm the availability of Wi-Fi
as well as the signal level at the desired installation location.
•
Note that Wi-Fi quality can vary significantly at different locations around the home due to
environmental factors such as home construction type and wireless interference from other
electronic devices.
Checking your Wi-Fi network coverage
1
Connect your phone to the 2.4GHz Wi-Fi network band of your internet/broadband router.
Note: The camera can connect to a 2.4GHz network only.
2
Place your phone where you are planning to install the floodlight unit. If you have Wi-Fi connection
on your phone, the camera will also likely be able to obtain Wi-Fi connection. Check the Wi-Fi
signal strength status icon at the top of your phone screen. We recommend a minimum of 1 bar
showing on the Wi-Fi icon as shown below. Further testing should be performed if the Wi-Fi signal
strength is only a single bar.
GETTING STARTED
Wi-Fi Coverage Availability
0
1
!
X
Wi-Fi signal strength
status icon
Excellent
Good
Fair
Poor
No connection
2
3
4