OPERATING INSTRUCTIONS
Changing & Cleaning the Pre- Motor Filter
Warning:
To reduce the risk of electric shock, the
power cord must be disconnected before removing
the dust-bin, dust-bin filter, changing the filters or
performing maintenance/trouble shooting checks.
The pre-motor filter is located in the vacuum
underneath the dust-bin. Please note that this filter
is a washable filter and can be cleaned by rinsing
under lukewarm water. Always allow the pre-motor
filter to air dry for 24 hours before replacing in the
vacuum. Do not use a hair dryer to dry it. Air dry
only.
To remove the pre-motor filter:
1. Remove the dust-bin (see page 6).
2. Remove the pre-motor filter and clean by rinsing
in lukewarm water.
3. After air drying for 24 hours, replace in the
vacuum.
Changing & Cleaning the Exhaust Filter
Warning:
To reduce the risk of electric shock, the
power cord must be disconnected before removing
the dust-bin, dust-bin filter, changing the filters or
performing maintenance/trouble shooting checks.
The exhaust filter is located on the front of the
vacuum below the dust-bin. To remove the exhaust
filter, you must first remove the exhaust grill. (fig 14)
1. Check the exhaust filter frequently and clean
when dirty.
2. Remove the exhaust filter by pulling down and
unclipping the exhaust grill. (see fig 14).
Changing & Cleaning the Exhaust Filter (cont.)
3. Take the exhaust filter out. (Fig. 15)
4. Rinse in lukewarm water and let the filter
air dry
for 24 hours
before re-installing into the vacuum.
Do not use a washing machine to rinse the filter. Do
not use a hair dryer to dry it. Air dry only.
Never operate the vacuum without ALL the
filters in place.
5. When the filter is dry, replace into the vacuum
and replace the front cover.
Note:
A severely soiled or clogged filter should be
thoroughly washed in tepid water. A mild detergent
can be used if required.
Cleaning the Dust-bin
Warning:
To reduce the risk of electric shock, the
power cord must be disconnected before removing
the dust-bin, dust-bin filter, changing the filters or
performing maintenance/trouble shooting checks.
The dust-bin can be washed
in lukewarm water. Do not use
strong detergents.
Ensure that the dust-bin is
fully dry before placing back
on the vacuum cleaner.
(Fig. 16)
Do not wash in dishwasher.
Fig. 14
Fig. 16
Fig. 14
Fig. 15
Exhaust
Filter
Pre-motor
filter
Fig. 15
Exhaust
Filter
Pre-motor
filter
8
