14 | SmithsEP.co.uk | Issue 006 - November 2022
Issue 006 - November 2022 | SmithsEP.co.uk | 15
Fault finding
Fault
Checking/Solution
Reduced air volumes and higher than expected noise levels are
being experienced
Is the correct fan speed selected?
Is the filter dirty?
Are the inlet/outlet grilles free from obstruction?
If volume control dampers are fitted, are they shut?
Are the flexible ducts installed correctly? (There should be no tight
bends, no restrictions and no excess material in the duct lengths)
Condensate does not drain or the unit leaks
Is the condensate pipe/drain free from obstruction?
Ensure the fan coils are installed level or slightly tilting toward
drain end
Is the air filter dirty? (Dirty filters restrict condensate flow)
Controls do not work
Have the commissioning valve caps or pegs been removed?
Has the set point temperature been reset correctly after
commissioning?
Is the sensor being ‘tricked’ by an external temperature influence?
Have the controls not yet finished their start-up diagnostics test?
In the event of any difficulty, please contact us on +44 (0) 1245 324560.
User manual
On/Off switch and variable speed controller
1
5
2
3
4
POWER
OFF
ON
FAN SPEED
ADJUSTMENT
MAIN
FUSE
3.15A
Registering your product
Thank you for purchasing a Smith’s product. It has
been designed and manufactured to the highest
quality standards to ensure it gives you efficient
and trouble-free service for many years. We are
committed to achieving the highest standards and
our faith is supported by a free parts and labour
guarantee with every product.
For more information on the warranty period
for this product please visit our website
smithsep.co.uk/product-registration/
This gives you the peace of mind that in the
unlikely event of product failure, we will repair
or replace the product completely free of charge
providing the product has been installed, used and
maintained in accordance with the instructions.
Your statutory rights are not affected by this
warranty.
It is important to register as soon as possible
online at: smithsep.co.uk/product-registration/.
This will ensure you will receive prompt and
efficient service if your product requires attention
within the warranty period. If you do not register
your product, you will be required to produce
proof of purchase prior to receiving service.
For more details please visit our website:
SmithsEP.co.uk
Disposal
Products with this symbol (crossed out wheelie
bin) cannot be disposed as household waste.
Old electrical and electronic equipment must be
recycled at a facility capable of handling these
products and their waste by-products. If you are
purchasing replacement equipment your retailer
may offer a ‘take back’ scheme, or will be able to
give details of the nearest approved authorised
treatment facility. Proper recycling and waste
disposal will help conserve resources whilst
preventing detrimental effects on our health
and the environment.
WEEE Registered Code: WEE/ED0093VW
After sales and spares
If you experience any problems with the use of
your product, please contact our after-sales office
+44 (0) 1245 324560.
For product information, customer services or
sales support call us on +44 (0) 1245 324900
For the Republic of Ireland, contact MT Agencies
on 01 864 3363
Sales: [email protected]
General information: [email protected]
Smith’s Environmental Products Ltd
Blackall Industrial Estate, South Woodham Ferrers,
Chelmsford, Essex CM3 5UW
SmithsEP.co.uk
@SmithsEP_UK
#ThinkSmiths
Approved CQS ISO
9001:2015
Certificate No. EM2001002
Certificate No. EM2001002
ISO 14001
ISO 14001
ISO 14001
