2 | SmithsEP.co.uk | Issue 006 - November 2022
Issue 006 - November 2022 | SmithsEP.co.uk | 3
Declaration of conformity
EC Declaration of conformity
We, Smith’s Environmental Products Limited
1-2 Blackall Industrial Estate
South Woodham Ferrers
Chelmsford
Essex CM3 5UW
Tel: 01245 324900 Fax: 01245 324422
Declare under sole responsibility that the products:
Product name:
Aegean
Product range:
SFC260, SFC235, SVFC500 (model sizes 10, 20,
25, 30, 40, 50, 55 & 60)
Conform to the following European
Union directives
Low Voltage Directive 2014/35/EU Harmonised
European Standard and Safety Directives
EN 60335-2-80:2003, +A1:04 + A209
EN 60335-1:2012/AC:14 + A13:2017
Electromagnetic compatibility (EMC) test
standards
EN 55014-1:2006 inc A1:2009 & A2 :2011
EN 61000-3-:2014
EN 61000-3-3:2013
Immunity
EN 55014-2:2015 in accordance with category
2 requirements
This Declaration is made on behalf of Smith’s
Environmental Products Limited.
Introduction
Smiths Aegean Fan Coil Unit (FCU) is designed
for heating, cooling and/or ventilating rooms.
The inlets and outlets of the unit are positioned
in such a way that the discharged airflow is
distributed evenly across the room without
causing discomfort to the people in it. The unit’s
dimensions are geared to integrating the unit in
suspended ceilings.
The fan coil unit blows a flow of air into the room.
The air may be taken in, at the user’s option,
either from outside (ventilation) or from the room
itself (recirculation). Thus, the unit offers two
benefits:
• The room is kept at the desired temperature
• Gradual deterioration of air quality in the room
is counteracted
Delivery
• Check the unit and its packaging for correct
delivery. Report any transport damage to the
driver and supplier immediately
• Make sure that all parts and components have
been supplied
• Report any defects to the supplier immediately
Handling
Please ensure that the current Manual Handling
Regulations are followed.
The infiltration of coarse dust, cement, etc. may
damage the unit. So long as such contaminants
are in the room,
• do not put the unit into operation
• cover the inlets and outlets
Contents
Introduction 2
Declaration of conformity
3
Symbols used in this guide
3
Important safety and installation instructions
4
Product Information
6
Installation 9
Commissioning 11
Maintenance 12
Fault finding
14
User manual
Speed controls
14
Registering your product
15
Disposal 15
After sales and spares
15
Symbols
This manual contains information and
prescriptions marked by the following symbols.
Ignoring these safety provisions
marked by the symbol “caution:
hazard” may endanger the safety
of people.
Ignoring these safety provisions
marked by the symbol “caution:
electricity” may endanger the
safety of people, as well as the
integrity of things.
The removal of the screws can
cause the output of hot fluids
under high pressure from heating
system. Drain the system or close
the isolating valves.
High temperature surface. Take
utmost care to prevent people
from getting in contact with the
hot surfaces of the appliance.
