4
• Read all instructions carefully and keep them for future reference.
• Remove all packaging.
• The filter has been installed in the spout of the Kettle during production. If it has been dislodged dur-
ing shipping check inside the Kettle or in the box. Install the Filter before using the Kettle.
IMPORTANT NOTES:
1. DO NOT remove or install the filter when the Kettle is hot.
2. DO NOT use the kettle without the filter in position:
- This may allow water to spit out when boiling
- The kettle may remain in the boil cycle too long once the water has boiled
- The kettle may not shut off
3. Fill the Kettle with 4 cups (1L) of cold tap water and bring to a boil. Add 2 cups (500 ml) of white
vinegar and let stand for at least 1 hour or overnight. Discard.
4. Fill the kettle to the maximum fill line with cold tap water. Bring to a boil and discard. Repeat.
5. The kettle is now ready to use.
BEFORE FIRST USE
SK34020_CAN_IM.indd 4
10/07/2017 17:13
