OSD Reference Guide
7
EN
•
SENS-UP
: Adjust the magnification of existing light sources to make it easier for the
camera to pick up defective pixels. If set too strong, the camera can mistaken regular
noise as defective pixels.
RS485
This function allows you to configure the camera’s RS485 protocol settings - camera ID,
display and baud rate. If you changed the default settings, make sure you take note of the
new values as the information in these settings are required to control the certain camera
features such as the OSD and PTZ when you connect the camera’s RS485 plug to an
external control device (e.g., Swann DVR).
VERSION
The firmware version of the camera.
ADJUST
SHARPNESS
: How crisp your images will be. Setting the sharpness too high will make
your pictures look pixelated, like old computer graphics. On the other hand, setting the
sharpness too low will make everything look soft and blurry.
MONITOR
: Select the monitor type which is closest to the type you are using. In the Monitor
submenu, you can also manually adjust GAMMA, BLUE GAIN, and RED GAIN levels for the
selected monitor type.
OSD
: Configure the way the OSD menu looks - OSD Text Colour and Outline.
LSC (Lens Shading Compensation)
: Enable to brighten the edges of the camera image.
NTSC/PAL
: Select either NTSC or PAL to match with your TV system.
RESET
Reset all OSD menu settings back to their factory default.
EXIT
Select EXIT to automatically SAVE your settings and close the OSD screen.
OSD Functions
