The Swann Safety Camera Kit allows you to wirelessly transmit pictures and
sound with ease. As the radio waves it uses have a frequency of 2.4GHz, they
can be received within a radius of up to 160
The Safety
Camera Kit Receiver works with other Swann wireless cameras to allow you to
have the option of using different frequencies for different locations and conditions
to ensure that you have the best possible image quality for your situation.
ft/50m in open line of sight.
Please note:
The Swann Safety Camera Kit broadcasts video in the public
domain. The video signal is not encrypted and could potentially be viewed by
anyone with a similar 2.4GHz receiver unit. Please keep this in mind when
positioning and using any wireless camera equipment.
•
Safety Camera with built in 2.4GHz Transmitter and Stand
•
4 channel 2.4GHz Receiver
•
Antenna for Receiver
•
2 x Mains Power Adaptor (1 for use with Camera and 1 for Receiver)
•
RCA A/V Cable
•
Manual & Accessories
•
Focus Tool
•
Dip Switch Tool
If any of these items are missing, please contact your retailer.
Technical Specifications
Introduction
Package Contents
NOTE:
All jurisdictions have specific laws and regulations relating to the use of cameras.
Before using any camera for any purpose, it is the buyer’s responsibility to be
aware of all applicable laws and regulations that prohibit or limit the use of
cameras and to comply with the applicable laws and regulations.
The legality of watching people other than yourself changes from country to
country and even state to state. Contact your local government's privacy
information body or your local Police for more information on what if any
restrictions you may face.
Receiver
Frequency: 4 Channels in 2.4 Ghz frequency band
Video input/output:
1V p - p / 75 ohm
Audio input / output:
1V / 10kW
Audio Bandwidth:
50 - 17000 Hz
Operating Power:
12V DC
Size:
4.7”x3.5”x1” (120 x 90 x 25mm)
*The Safety Camera Kit uses following frequencies for the 4 channels:
Channel 1( 2414MHz), Channel 2 (2432MHz), Channel 3 (2450MHz)
and Channel 4 (2468MHz).
Safety Camera
Sensor: 1/3” Colour CMOS
Horizontal Resolution:
380 TV lines
Auto Electronic Exposure:
1/60 - 1/15000 sec.
Minimum Illumination:
1 Lux @ f1.2
Signal to Noise Ratio:
>48dB
7
Board Lens:
/ ” ; 5.6mm
32
View Angle:
60 degrees
Video System:
PAL 50Hz (Australia, UK/Europe),
NTSC 60Hz (USA and Canada)
Automatic Exposure / Gain / White balance/IR LED activation
Available Channels: 4 Channels in 2.4Ghz frequency band*
RF Output Power:
FCC, CE and C-tick compliant
Operating Power:
12V DC
Size:
1.1”x1.2”x1.1” (28x30x28mm)
Antenna:
Omni-directional
Transmitting Range:
Up to 160ft ~ 50M line of sight
Weight:
¾oz ~ 20 grams
Operating Temperature:
-10° - 50°C (14° - 122°F)
WARNING - IMPORTANT SAFETY INSTRUCTIONS
To reduce fire or shock hazard do not expose the unit or adapters to rain or moisture
Do not handle damaged or leaking Lithium-Ion batteries
Do not use if any of the terminals or wires are exposed
Use only the power adapter that is included in this pack in an upright or vertical position
Any modifications not approved by Swann Communications PTY LTD. may void the user’s
ability to operate this product
