background image

20

20

20

© Swann Communications 2009

Swann Communications warrants this product against defects in workmanship and material 

for a period of one (1) year from it’s original purchase date. You must present your receipt 

as proof of date of purchase for warranty validation. Any unit which proves defective during 

the stated period will be repaired without charge for parts or labour or replaced at the sole 

discretion of Swann. The end user is responsible for all freight charges incurred to send the 

product to Swann’s repair centres. The end user is responsible for all shipping costs incurred 

when shipping from and to any country other than the country of origin. 

The warranty does not cover any incidental, accidental or consequential damages arising 

from the use of or the inability to use this product. Any costs associated with the fitting or 

removal of this product by a tradesman or other person or any other costs associated with 

its use are the responsibility of the end user. This warranty applies to the original purchaser 

of the product only and is not transferable to any third party.  Unauthorized end user or 

third party modifications to any component or evidence of misuse or abuse of the device will 

render all warranties void.

 By law some countries do not allow limitations on certain exclusions in this warranty.  Where 

applicable by local laws, regulations and legal rights will take precedence.

Swann Communications USA Inc.

12636 Clark Street

Santa Fe Springs CA 90670

USA

Swann Communications PTY. LTD. 

Building 4, 650 Church Street,

Richmond, Victoria 3121

Australia

Warranty Information

Helpdesk / Technical Support Details

Swann Technical Support

All Countries E-mail: [email protected]

Telephone Helpdesk

See http://www.worldtimeserver.com for information on time zones and the 

current time in Melbourne, Australia compared to your local time.

USA toll free

1-800-627-2799

(Su, 2pm-10pm US PT)

(M-Th, 6am-10pm US PT)

(F 6am-2pm US PT)

USA Exchange & Repairs

1-800-627-2799 (Option 1)

(M-F, 9am-5pm US PT)

AUSTRALIA toll free

1300 138 324 

(M 9am-5pm AUS ET)

(Tu-F 1am-5pm AUS ET)

(Sa 1am-9am AUS ET)

NEW ZEALAND toll free

0800 479 266 

INTERNATIONAL

 +61 3 8412 4610

1

SW242-WDV / SW242-WRA
SW244-WDS / SW244-WDW

www.swannsecurity.com

  

RedAlert

TM

Single Channel Security 

Monitoring Kit

Operating Instructions

Advanced security made easy

SR242-WDV-10006-060809

Summary of Contents for REDALERT SW242-WDV





















Reviews: