B
ASIC
SETUP
B
ASIC
SETUP
EN
BASIC SETUP
EN
BASIC SETUP
10
11
The
eSATA port
can be used for
connecting
eSATA Hard Drives to
store your recordings.
Connecting Additional Devices
The front USB 2.0 port can be used for backing up footage to a
USB Flash Drive/Hard Drive (HDD) and applying new firmware.
This port can also be used to connect a USB mouse.
Controlling the NVR
Starting the NVR for the first time
When you first boot the NVR, it will automatically start the Setup Wizard which will guide you through the various setup
options available.
The USB Mouse
The easiest way to operate the NVR is to use the included USB optical mouse - we put together the look and feel of the menu
system specifically for mouse-friendly navigation.
The controls are pretty easy to remember - heck, there are only two buttons. It couldn’t be simpler.
Left click:
Selects an item or confirms a choice.
Right click:
Opens the menu bar from the live viewing screen.
Returns one “step” from a submenu.
Opens a context menu in some settings screens.
The Scroll Wheel:
Can be used to adjust the values of sliders and scales when highlighted by the mouse.
The Remote Control
The NVR also comes supplied with a remote control unit. Like the USB Mouse, it can be used to perform all the main functions of
the NVR. For details of what each button does, see the layout of the remote control below.
1
Standby:
Send the NVR into standby mode. No recording will occur while the
NVR is set to
Standby
. To wake up the NVR from standby mode, just press the
button again.
2
Login / Lock:
Lock the NVR so that it requires a password to re-open,
or initiates unlocking the NVR if it’s already locked. Only works once the
password function has been enabled and a password set (see page
45
for
details).
3
Numeric Buttons:
Can be used as shortcuts to a specific channel, and are
useful for quickly entering numerical passwords.
4
Display Mode:
Enter split-screen view, where the screen shows one, four
(
“quad” mode 2 x 2
) or eight (
3 x 3 with one space blank
) video feeds at once.
5
Menu:
Open the NVR’s menu.
6
PTZ*:
Open the Pan/Tilt/Zoom control screen.
7
Exit:
Return to the previous menu or exit to Live View screen while the main
menu is displayed.
8
Arrow Buttons:
Navigate around menus or toggle through options.
9
OK:
Confirm selection.
10
+ / -*:
For adjusting the zoom of PTZ devices.
11
Record:
Trigger manual recording mode.
12
Stop:
Stop manual recording. Won’t have any effect on recordings triggered
by the schedule in either normal or motion-based recording modes.
13
Mute*:
As the name suggests, this mutes the audio output of the NVR.
14
Playback Controls:
Open the playback interface from the live viewing mode.
Pause, rewind, fast forward or resume playback from paused.
* not operational.
1
3
4
6
9
10
11
12
14
13
10
8
7
5
2
Wireless Mice and Bluetooth devices
are
NOT
compatible with the NVR.
Please use the USB optical mouse
supplied.
Note