2
Important instructions
1.
Make sure your camera is fixed correctly and
stable if fastened in place.
2.
Only use the supplied power adapter (48V).
3.
Do not manually pan and tilt your camera when
it is turned on as it may damage the internal com-
ponents.
4.
Never place strain of any kind on the network
cable connection. It’s designed to clip into place to
prevent slippage, but it won’t support any weight
and can be easily broken by a sharp tug.
5.
The audio input requires a powered or amplified
microphone or audio source to work correctly.
6.
The earth connection is optional. For added
safety from lightning strikes and or power surges,
screw this to a metal surface or object.
7.
To perform a factory reset, disconnect the pow-
er input, hold down the reset button, reconnect
the power input and continue holding the button
for at least 20 seconds then release.
8.
This camera can only be used with Swann’s
NVR-7300 Series HD Network Video Recorders.
9.
Have a look at page 6 for instructions on how to
control your camera.
Please note:
Have a look at the camera location
tips included with your NVR, to select the best lo-
cation for your camera.
Important note:
All jurisdictions have specific
laws and regulations relating to the use of cam-
eras. Before using any camera for any purpose,
it is the buyer’s responsibility to be aware of all
applicable laws and regulations that prohibit or
limit the use of cameras.
Introduction
