Swann NHD-817 Instruction Manual Download Page 10

10

Limited Warranty - Terms & Conditions

Swann Communications warrants this product 
against defects in workmanship and material for 
a period of one (1) year from its original purchase 
date. You must present your receipt as proof of 
purchase for warranty validation. Any unit which 
proves defective during the stated period will be 
repaired without charge for parts or labour or re-
placed at the sole discretion of Swann. The end 
user is responsible for all freight charges incurred 
to send the product to Swann’s repair centres. The 
end user is responsible for all shipping costs in-
curred when shipping from and to any country 
other than the country of origin. 
The warranty does not cover any incidental, acci-
dental or consequential damages arising from the 
use of or the inability to use this product. Any costs 
associated with the fitting or removal of this prod-
uct by a tradesman or other person or any other 

costs associated with its use are the responsibility 
of the end user. This warranty applies to the origi-
nal purchaser of the product only and is not trans-
ferable to any third party. Unauthorized end user 
or third party modifications to any component will 
render all warranties void. By law some countries 
do not allow limitations on certain exclusions in 
this warranty.  Where applicable by local laws, 
regulations and legal rights will take precedence.

For Australia:

 Our goods come with guarantees 

which cannot be excluded under Australian Con-
sumer Law. You are entitled to a replacement 
or refund for a major failure and for compensa-
tion for any other reasonably foreseeable loss or 
damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of ac-
ceptable quality.

Summary of Contents for NHD-817













Reviews: