Swann Maxi-Brite PNP-150, Operating Instructions Manual, Page: 7 / 24

7
Troubleshooting Guide
Technical Specifications
Problem:
I can’t see the camera on my TV.
Solution:
Ensure the camera is plugged in and the TV or VCR is tuned to the
correct input channel.
Problem:
When I view my camera at night I only see a bright spot and no image.
Solution:
Night Vision will reflect when shining through a window. Move the
camera to the other side of the window or another location.
Problem:
The BNC Extension Cable will not connect to my TV.
Solution:
Connect the BNC to RCA adapter to the end of the Extension Cable
and plug into the TV.
Problem:
On my Swann DVR, Video Loss appears where my camera should be.
Solution:
Check the Extension cable is securely connected to the camera and
check the connection is secure on the back of the DVR. Also ensure the camera
has power by trying a second power outlet.
7
Video
Image Sensor 1/3” Color Super CMOS
Video Quality 400 TV Lines
Number of Effective Pixels NTSC: 510 x 492 / PAL: 628 x 582
Minimum Illumination 0 Lux (IR on)
Day/Night Mode Color during day / switches to B&W night
White Balance Automatic
Signal / Noise Ratio > 50dB
Electronic Shutter 1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL
Gain Control Automatic
Backlight Compensation Yes
Lens 6mm
Viewing Angle 53 degrees
Night Vision
Number of Infra-Red LEDs 30
Infra-Red Wavelength 850nm
Night Vision Distance Up to 30ft / 9m
Infra-Red LED Life 10,000 hours
General
Operating Power DC 12V
Operating Temperature -10°C ~ 50°C / 14°F ~ 122°F
Body Construction ABS Plastic
Dimensions - Camera 5.5” x 2.8” x 2.8” / 140mm x 70mm x 70mm
Dimensions – Stand 4.5” x 2.3” x 2.3”/ 120mm x 60mm x 60mm
Weight – Camera & Stand 0.5lbs / 235g