11
B
ASIC
SETUP
The Setup Wizard
Starting the DVR for the first time:
When you first boot the DVR, it will automatically start ‘The
Setup Wizard’ which will guide you through the various setup
options available.
The wizard contains six quick setup screens
which will allow you to choose how you want the DVR to
behave.
Please be patient as it can take up to 40 seconds for
the wizard to appear after the DVR is turned on.
You’ll be asked to:
• Select a language.
• Set a password for the ADMIN account.
• Configure the time, date and time zone for your location.
• Configure the DVR so it can operate on your network and
access (and be accessed from) the Internet.
• Initialize and format your hard drive(s), if required.
Setup Wizard: Wizard
When this check-box is left ticked, the setup wizard will run again
the next time the DVR is rebooted or powered on. If you don’t want
the wizard to start next time the DVR is turned on, uncheck this
box.
To access the wizard once it’s been disabled, open
Main Menu >
Configuration > General
and select
Enable Wizard
.
Setup Wizard: Language
System Language:
Select the language you’d like the menu
system to be displayed in.
