7
Menu Functions
After connecting the ADW-300 camera & receiver to your TV/VCR you will be able
to set up your camera/s to your receiver. To access the menu press the M button
on the receiver.
Audio vol
Use the LEFT & RIGHT arrow keys on the receiver to increase and decrease the
volume.
Scan time
This function allows you to change the display between single camera view and
quad view. You can also set the receiver to change between each camera display
in single camera view (must have atleast 2 cameras for this). Use the RIGHT & LEFT
arrow keys to scan between OFF (no scanning), 5, 10 & 15 second intervals.
Cameras 1-4
You can switch each channel ON & OFF. If the channel is set to OFF the display
will be completely black even when a camera is connected to that channel. Use
the RIGHT & LEFT arrow keys to switch between ON & OFF. When a channel is
switched OFF it will be skipped when scanning is activated.
Pair CAM 1 2 3 4
If you are unable to view a picture on your camera/s display your camera may not
be properly paired with a channel.
To pair a camera use the arrow keys to select between channel 1, 2, 3 & 4. Once
you have selected the channel you want to pair the camera with, press the CAM-
ERA SELECT button on the receiver.
You should now see a timer counting down on your TV. Using a pin or toothpick
press the PAIRING button on the back of the camera you want to pair with the
channel you have selected.
Note: you will have 60 seconds until the receiver stops searching for the camera’ss
signal.
Reset
To reset the settings above use the UP & DOWN button to scroll down to the RESET
option. Press the CAMERA SELECT button to reset the receiver options.
Note: this
will not reset any camera that is paired to a channel.
