11
OPERATION
hose. Adjust the fan speed and the temperature set point according to the ambient
temperature.
The cooling function turns off when the room temperature is below the set temper-
ature. Ventilation, however, continues to operate at the set level. The cooling func-
tion starts again as soon as the room temperature exceeds the set temperature.
The set temperature can be set between 16 ° C and 31 ° C
b. DEHUMIDIFICATION Mode:
When the DEHUMIDIFICATION mode is selected, the fan speed can not be adjusted.
By default, this will be set to the slowest speed. The « Sleep » function can not be
adjusted. Only the timer function can be configured.
Note :
•
It is not necessary to use the exhaust hose in the DEHUMIDIFICATION mode
•
Windows and doors must be kept closed.
•
Continuous drainage can be achieved by connecting a drain hose to the back of
the unit.
c. FAN Mode:
When the VENTILATION mode is selected, the air circulates in the room without be-
ing cooled. Only the timer function and the fan speed can be configured.
Note :
• It is not necessary to use the exhaust hose in FAN mode.
• The temperature and « Sleep » function can not be adjusted and selected
3. TEMPERATURE ADJUSTMENT:
The UP/DOWN keys are used to adjust the target temperature. This setting is con-
figurable only in cooling mode. By pressing the “UP” or “DOWN” button, the target
temperature is displayed on the screen.
4. VENTILATION SPEED:
The speed can only be adjusted in COOLING and FAN mode. The button on the
control panel or on the remote control can be used to select the desired speed by
successive presses): There are two speed: LOW and HIGH
SAC16810N_IM.indd 11
27/03/2020 11:11