17
Swagtron T881 Hoverboard
English
+
Avoid riding sideways or turning on slopes. The self-balancing sensors may malfunction and may require
recalibration.
+
Do not step on the center pivot point of the T881.
+
If the T881 flips over or rotates more than 180 degrees, motor and riding capability will be disabled. To
restore normal functions, power off the unit then and power the unit back on. After this, continue to ride
as normal.
3.3 CALIBRATION
If your SWAGTRON® T881 seems to pull to the left or right during your ride, you may need to recalibrate its
sensors. The process requires a flat stable surface and a level. Levels may be purchased separately at most
hardware stores or level apps may be downloaded with most smartphones. To calibrate your unit, follow the
instructions below.
1. Power your T881 off.
2. Rotate the T881 until both pedals are level over the
ground. For best results, use a level.
3. While the T881 remains level, hold the power button
down to turn on the unit and keep holding the button
down.
4. Wait an additional 3 seconds and you will hear a single
beep. Release the power button.
