19
SWAGTRON
®
T588 Hoverboard
English
foot. In general, it’s easier to step off the back of the hoverboard. Be careful when stepping off for the first time.
CAUTION
The SWAGTRON has an inertial dynamic stabilization system that keeps you upright. However, it
will stop detecting you if you lean too far left or right or if you take a foot off of the board. Slow
down before turning or you will fall off and be injured.
+ Avoid turning suddenly when riding fast, as this may result in an accident.
+ Do not step on the center pivot point of the SWAGTRON
T588.
3.3 CALIBRATION
If your SWAGTRON
T588 seems to pull to the left or right during your ride, you may need to recalibrate its sensors.
The process requires a flat stable surface and a level. Levels may be purchased separately at most hardware stores
or level apps may be downloaded with most smartphones.
STEP 1.
Turn the hoverboard off.
STEP 2.
Rotate both sides of the hoverboard so the pedals are level. Using a level tool is recommended for
accuracy.
STEP 3.
With the hoverboard level, press and hold the power button for ~6 seconds. Release the button
after the board emits a single beep. The lights will begin flashing.
STEP 4.
Make sure the pedals are level, then press the power button again to turn the hoverboard off.
STEP 5.
Turn the hoverboard on and try riding to check calibration.
If the T588 is still not calibrated correctly, repeat step 1 to 6 or contact customer support for additional assistance.
Summary of Contents for T588
Page 31: ......
