16 SWAGTRON
®
T588 Hoverboard
English
III – HOW TO RIDE
3.1 RIDING INSTRUCTIONS
Before riding, equip suitable protective gear and
make sure the hoverboard is placed on a level surface
and fully charged. See
SECTION 5.1
for charging
instructions.
STEP 1.
Press the power button to turn on the
hoverboard.
STEP 2.
Step on one pedal then quickly step
on the other pedal.
STEP 3.
Stand upright but relaxed and lean
slightly in the direction you want to
go. Do not make any sudden or jerky
movements.
If the hoverboard doesn’t seem to work, check make
sure your feet are centered on the pedals.
+ Do not ride sideways across slopes.
+ If the T588 does not start self-balancing automatically, the system indicator may light up and/or flash to
indicate an error. DO NOT operate the T588 under these conditions. Turn the hoverboard off and back on
Power Button
STEP 1:
Press the Power Button to turn on your T588.
STEP 2:
Step on
ONE PEDAL
to trigger the foot-switch. System will enter
self-balancing mode with system indicator light flashing.
Step on ONE PEDAL
Summary of Contents for T588
Page 31: ......
