SWAGTRON
TM
SWAGDRONE
TM
210-UP Racing Quadcopter Quick Start Guide
9
7.0 Pre-Flight Setup
*
Place the drone in a wide openspace with the rear facing you. This position is known as
"Tail In".
*
Put the function switches to the 0 position, and place the trims and dials to the middle
position. Move the throttle to the lowest position, and turn on the Remote Control.
*
Video receiving equipment is needed to display image and OSD information. Refer to
Sections 10.3 to 10.7.
*
The 210-UP uses a low voltage alarm beeper.
*
The OSD provides a visual reference for the remaining battery power.
*
When the voltage reaches below 14 volts, the right LED will flash quickly and the beeper
alarm will sound.
*
The 210-UP is designed for FPV racing, as there is no automatic landing mode.
*
Please land as soon as possible once you hear the the alarm or the OSD shows 14 volts.
7.1 Binding Your SwagDrone
*
Do not move the drone during binding.
STEP1. Turn on the remote control. Make sure all the
function switches and that all the trims/knobs
and throttle sticks are at the lowest position.
STEP2. Place the drone on a horizontal plane and
connect the drone's power, so that the LEFT
red LED light will turn on. Make sure the
positive and negative ports are correctly
connected.
