SWAGTRON
TM
SWAGDRONE
TM
210-UP Racing Quadcopter Quick Start Guide
17
10.6 OSD Information
Upgrade
For upgrades, please go to swagtron.com for details. Use the UP02 cable and connector to
connect.
10.7 Receiver Introduction
Fixed ID Code Removal
In the event that you want to clear the fixed ID from
the remote controller, follow these steps.
STEP1. Press the Clearing Key button, and power
on the 210-UP.
STEP2. The Receiver's RED LED will slowly blink to
indicate that the fixed ID has been cleaned.
STEP3. Set the Remote Control's Fixed ID setting to
OFF.
1. 5V power output
2. Brushless ECS connectiont position(CCW)
3. Brushless ECS connectiont position(CW)
4. Lighting Lamp Connection port
5. Camera Connection Port: (3 pins/11.1V)
6. Main controller Flexible flat cable Connection port
7. Buzzer:
(An alarm which sounds automatically when the signal
between the drone and remote controllers are suddenly
lost or the battery voltage dips below 14.0V)
8. Rear LED light connection port
9. Connection port for receiver or
external receiver converter
10. OSD connection port
11. Transmitter connection port
12. Video switch:
Without OSD, Please turn the switch from
“1” to "ON" position to start the video.
With OSD, Please turn the switch to "1"
position to shut off the video.
O N
2
1
O N
2
1
Port Introduction
1. Upgrade port: used for program upgrading
2. Code switch: slide the code switch from“1” to "ON" to start the OSD
Please use UP02 and the UP02 adapter to upgrade.
O N
2
1
UP02 Adapter
UP02
Clearing Key
