INSTRUCTION SHEET
PRODUCT:
64701 Patrol Pick Up Rack • Page 2 of 2
Swagman • 300 - 1880 Government St. • Penticton, B.C. Canada V2A 7J1 • Phone (250) 490-8883 • Fax (250) 490-8885 • www.swagman.net
REV 20/07/16
Installing the bikes:
1. Remove the front wheel from the bike.
Insert the fork blade into the bike mount
bracket With the QR lever in the open
position, hand tighten the nut on the
opposite side of the lever.
2. Then close the QR lever so that the fork is
tight in the bike support bracket. Move the
bike back and forth to ensure that the fork
is tight in the bracket. Lock the QR Lever.
Important Notes:
1. Always keep the tailgate on the pickup
closed when hauling bicycles.
2. You should remove large objects from the
bicycle like child seats, panniers, or bike
covers to reduce wind resistance.
3. Check periodically that the rack and bikes
are securely attached.
Interchangeable axles
The rack comes with the 9mm installed.
If you are using the Enforcer with a 15mm thru
axle you will need to remove the 9mm QR
lever and adapter. Using the supplied Allen
key, loosen the set screw at the side of the fork
block. Slide the 9mm axle out and replace with
the 15mm axle adapter. Line up the axle and
tighten the set screw. You need to use your bike
thru axle if mounting a 15mm or 20mm fork.
The rack has an optional interchangeable axle
to fit 20mm thru Axles and 150mm x 15mm
thru axle with score line at 142mm and 138mm
for assorted Fat Bike Dropout widths.
en d
pi n
plate
6
5
7
