SWAGBOARD NG-1, User Manual

Page: 11 / 24

11 SWAGBOARD
TM
NG-1 NewGen Electric Skateboard
Ensure the Swagboard is fully or suitably charged and place it down so that the Control Box is facing the ground
before using the remote or skateboard.
Before the Swagboard can be fully used, it must be
wirelessly connected to the remote. In most cases,
after turning on the Swagboard and the remote,
both will automatically connect. If the automatic
connection is successful, the Connection Indicator
will turn off.
If an automatic connection fails, the Swagboard
and remote will continue to attempt connecting for
approximately 30 seconds while the Connection
Indicator flashes. If the connection was unsuccessful,
the remote and skateboard will need to be turned
off. Restart to begin another automatic connection.
Section 3 – Usage and Instructions
3.1 – Connecting
Remote Connection
The white LED indicator
will be off once the
Swagboard and remote
are successfully
connected.