www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
40015L
3.
Adjust the rest of the wire to the
phase and insert the awl complete
into the female adapter, if
necessary by using a screwdriver
or something like that. The exact
fitting will help to connect the part
to the male adapter.
4.
Pull the sleeve back and install
the female adapter with the
male part. Take care that the awl
is deep inside the female adapter.
5.
Release the sleeve and make
sure, that the connection of the
two parts is stable.
If necessary pls. repeat the a.m.
steps.
6.
Insert the other end of the wire
through the bottom of the safety
handle, guide it through the eyelet
and fold the wire in a angle of 180°.
Close the handle subsequently to
fix the wire.
By pulling the safety handle the
windshield can be easily removed.
