SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
Leverkuser Strasse 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid / Germany
E-Mail: [email protected]
18
Operation
Possible Messages
YES
All monitoring programs supported on the vehicle have
completed their diagnostic testing and the MIL light is not on
NO
At least one monitoring supported on the vehicle has not
completed its diagnostic testing, and/or the “Check Engine” (MIL)
light is on
READY
Indicates that a particular monitoring being checked has
completed its diagnostic testing
Not RDY
indicates that a particular monitoring being checked has not
(
NOT READY)
completed its diagnostic testing
N/A
The monitoring is not supported on that vehicle
“
→
”
a flashing Right Arrow indicates additional information is
available
on
the next screen
“
←
”
a flashing Left Arrow indicates that the last screen has been
reached.
Pressing
Forward
again will lead to the first message
Select 3.I/M from the main menu by pressing the
OK
button.
Press the
Forward
button to view the status of the
MIL
light
(“
ON
” or “
OFF
”) and following monitoring programs:
MISFIRE
Misfire monitoring
FUEL
Fuel System Monitoring
CCM
Comprehensive Components Monitoring
EGR
EGR System Monitoring
O2S
O2 Sensors Monitoring
AT
Catalyst Monitoring
EVAP
Evaporative System Monitoring
HO2S
O2 Sensor Heater Monitoring
2AIR
Secondary Air Monitoring
HCM
Heated Catalyst Monitoring
A/C
A/C System Monitor
Press the
OK
button to return to the main menu.
MENU:
3.I/M
