www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
B
E
D
IE
U
N
U
N
G
S
A
N
L
E
IT
U
N
G
/
IN
S
T
R
U
C
T
IO
N
M
A
N
U
A
L
20307L
Operation instruction
Positioning jack beneath load
Before use ensure the transmission weight and size does not exceed the capacity of the jack.
1.
Ensure the vehicle from which the gearbox is to be removed is correctly positioned
(well
balanced
)
, handbrake applied and raised to allow the transmission jack to be positioned
correctly.
2.
Ensure there are no other persons around or under the vehicle.
3.
Ensure saddle is in its lowest position and use handle to transport and centrally position
jack beneath vehicle transmission.
4.
Pump the jack foot peddle and the saddle will rise.
5.
When saddle is just beneath the transmission re-adjust alignment if necessary to
centralise the saddle.
Lowering the load
WARNING!
Ensue the load is central and stable on the jack saddle and load is fixed in place before
attempting to lift, lower, or transport. Slowly turn the release valve knob anti-clockwise to
gently lower saddle to the lowest minimum height before attempting to transport load.
IMPORTANT:
The unit is fitted with a Dead Man release valve. The quicker the valve knob is turned the
more rapid the jack’s descent. Ensure the jack’s descent is slow and controlled to avoid the
risk of sudden dropping which could be dangerous. The valve will automatically return to the
closed position when the knob is released.
Transporting the load
1.
Ensure the jack saddle is fully lowered and load is fixed in place before attempting to
lift, lower, or transport.
2.
Transport the load over level and solid ground, preferably concrete, and ensure the
floor is swept clean beforehand
.
3.
Be diligent in continually monitoring the load in transit. Keep all other persons at a safe
distance.
