SW Stahl PROFI Tools 32235L, Operator'S Instruction Manual

Page: 50 / 72

32235L
2.2 LCD Display
See Table 1 indicated for information about the LCD display.
AC
Table 1. Display Symbols
Symbol Meaning
The battery is low.
Warning: To avoid false readings, which
could lead to possible electric shock or
personal injury, replace the battery as soon as
the battery indicator appears.
Indicates negative readings.
Indicator for ac voltage or current.
AC voltage and current are displayed as the
average of the absolute value of the input,
calibrated to indicate the equivalent rms value
of a sine wave.
Indicator for dc voltage or current.
AUTO
The Meter is in the Autorange mode in which
the meter automatically selects the range with
the best resolution.
7
Table 1. Display Symbols (continued)
Symbol Meaning
Indicator for the Diode Test mode
hFE
Indicator for the transistor test mode
Indicator for the Continuity Check mode.
Indicator for the Data Hold mode
V, mV
V:
mV: Volts. The unit of voltage.
Millivolt. 1x10
-3 or 0.001 volts.
A, mA, A
A:
mA:
A :
Amperes (amps). The unit of current.
Milliamp. 1x10
-3
or 0.001 amperes.
Microamp. 1x10 -6 or 0.000001
amperes
, k , M
:
k :
M :
Ohm. The unit of resistance.
Kilohm. 1x10 3 or 1000 ohms.
Megohm. 1x10
6
or 1,000,000 ohms.
Hz, kHz, MHz
Hz:
KHz:
MHz:
Hertz. The unit of frequency in
cycles/second.
Kilohertz. 1x10
3
or 1000 hertz.
Megahertz. 1x10 6 or 1,000,000 hertz.
F, nF
F:
F:
nF:
Farad. The unit of capacitance.
Microfarad.1x10
-6
or 0.000001
farads.
Nanofarad. 1x10 -9 or 0.000000001
farads.
The input is too large for the selected
range.
8
8