www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
25070L
Attention:
When using tool, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Always wear safety glasses and glows. Read all
instructions before using this product!
Maintenance
1. After each use, clean up any spills around the work area, as glass abrasive is very slippery
and creates a dangerous work environment
2. Do not re-use abrasive; the abrasive breaks down into dust, resulting in poor working
visibility and inferior performance.
3. Periodically, run air through the gun without abrasive to check for leaks, tighten nozzles and
hardware if necessary.
Nr. Beschreibung
1
Gun Body
2
Hopper
3
Lid
4
Nozzle
5
Ring Nut
6
Screw
7
Air Valve
8
O-Ring
9
O-Ring
10
Valve Stem
11
Spring
12
Trigger
13
Rivet
14
O-Ring
15
Regulator
16
Lock Pin
17
Screw
18
Washer
19
Air Inlet (1/4” NPT)
