-1
4
-
1. The original factory default programming
password is 1234.
2. In the programming mode, set 40 groups of
4-digit codes for door open.
Set programming code
1. Switch off the power, press * and hold, switch on the power. After
hearing a long sound, release *.
2. After the long sound stops, another sound is heard, now you can
enter the new 4-digit programming password.
3. After entering the new password, a "DI" sound can be heard for 5
times.
Enter to the programming mode
1. Press *, "DI" sound should be heard twice, and then enter
4-digit programming password, "DI" sound should be heard
three times with LED light flashing. It indicates entering to the
programming mode successfully.
2. Press * to exit the programming mode with "DI" sound in five
times.
Set unlocked time
Factory default setting is 5 seconds.
1. Enter to the programming mode first.
2. Enter code 00, and "DI" sound should be heard twice.
3. Enter the targeted unlocked time: 2 digits (01 - 99 seconds);
00 is not valid in this mode.
4. After "DI" sound is heard for three times, it will return to
programming mode.
5. Press * to exit the programming mode.
8.How to set up the
u
ser
c
odes
