Page 31
N2000 Series User Manual
www.svsiav.com
Chapter 2. Installation
Changing IP Addresses
STEP 5
CONNECTING ENCODERS TO AN INPUT SOURCE
Having already connected the Encoder(s) to the network and made the appropriate settings changes (as
described in
), you can now connect to the appropriate AV source(s).This connection from
an Encoder
DVI-I
port (female) to an input source is accomplished using either a DVI-I cable or HDMI
(through adapter).
1. Connect the source you would like to use for the Encoder (camera, laptop, etc.) to the
Encoder’s
DVI-I Input
port using a DVI-I cable (or HDMI through adapter). This connection
can be digital or analog.
2. Repeat until all Encoders are connected to their sources.
Figure 2-11. Encoder Connection to Source
N2000 Encoder
PoE-Enabled Switch
Network
DVI-I Cable (or HDMI through adapter)
Cat-5 Cable
