SVS-Vistek svs1020 User Manual Download Page 85 | Manualshive

Page: 85 / 87

background image

Users Manual – svs4021, svs2020,svs2050, svs2051, svs1020, svs1050, svs285, svs340, svs625

p. 85

Last Update 20.07.2009

DANGER

If any overheating sign is observed, discontinue the use
immediately.

In the event that smoke, smell, or any other overheating sign is
observed, turn the power switch of the system OFF immediately

and remove the power cable(s) from the system connectors, like

computer, camera, lightning. Do NOT try to continue to use the
system. To do so in spite of clear signs of malfunction invites a

fire, an electric shock hazard, or a serious damage to the system
components. In such case, contact for repair service us or our

dealer/distributor, from which you purchased the system.
If any malfunctioning sign is observed, discontinue the use

immediately.

Do NOT try to use the system when it is malfunctioning. (Ex. No
images on the monitor) In the event of malfunction, turn the

power switch of the system OFF immediately and remove the
system power cables from the system components connectors. In

such case, contact for repair service us or our dealer/distributor

from which you purchased the system.
If any foreign object gets into the system components,
discontinue the use immediately.

In the event that liquids, small particles, or any other foreign

objects get into the system components, do NOT try to continue
to use the system. To do so invites a fire or an electric shock

hazard. In that case, turn the power switch of the system
components OFF immediately and remove the system power

cables from the system components connectors. After that,

contact us or our dealer/distributor from which you purchased
the camera for repair service/technical advice.
Do NOT disassemble the system components.
Do NOT attempt to pull apart; repair, or modify the system

components on your own. To do so leads to a fire or an electric
shock accident. Contact us or the dealer/distributor from which

you purchased the camera for repair/modifacation.
Do NOT supply any power than specified.

The system components are designed to work only under
specified voltage. Do NOT attempt to drive the system

components with the power other than specified. Operating the

system components under power other than specified invites a
fire or a electric shock hazard.
Do NOT use the system components in a high-humidity
environment.

Do NOT place the system components near a humidifier, or in
other high-humidity environment. To do so may cause a fire or

an electric shock accident.

CAUTION

If the system components are operated in the electromagnetic

field, there may be cases where noises (vertical, horizontal, or
oblique stripes) may appear to a video output or causes other

«
...
83
84
85
86
87
»

Summary of Contents for svs1020
























































































Reviews:

No comments

Related manuals for svs1020

Brand: Canon Pages: 114

Brand: Canon Pages: 2

Brand: Canon Pages: 2

Brand: Canon Pages: 138

Brand: Canon Pages: 2

Brand: Canon Pages: 35

Brand: Canon Pages: 2

Brand: Canon Pages: 26

Brand: Olympus Pages: 2

SMART CAMERA DV300F

Brand: Samsung Pages: 168

750-GP1 - Stylus 750 7.1 MP 5X Optical Zoom All...

Brand: Olympus Pages: 2

Stylus Verve - Stylus Verve 4MP Digital...

Brand: Olympus Pages: 192

BluePirat Remote

Brand: Magna Pages: 83

T737 - Digital Camera - Compact

Brand: Polaroid Pages: 58

Brand: Auricon Hollywood Pages: 10

Brand: bluemango Pages: 20

Brand: Minolta Pages: 33

Brand: Olympus Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands