SVS-Vistek EXO Series, Manual

Page: 66 / 144

SVS-VISTEK
Feature-Set 66
7.2.5 ROI / AOI
In Partial Scan or Area-Of-Interest or Region-Of-Interest (ROI) -mode only
a certain region will be read.
Figure 35: AOI on a CCD sensor
Selecting an AOI will reduce the number of horizontal lines being read.
This will reduce the amount of data to be transferred, thus increasing the
maximum speed in term of frames per second.
With CCD sensors, setting an AOI on the left or right side does not affect
the frame rate, as lines must be read out completely.
In CMOS Sensors, AOI can be chosen, too.
7.3 I/O Features
7.3.1 Assigning I/O Lines – IOMUX
The IOMUX is best described as a switch matrix. It connects inputs, and
outputs with the various functions of SVCam I/O. It also allows combining
inputs with Boolean arguments.
Figure 36: "IN0" connected to "debouncer"
LineSelector
translation