manualshive.com logo in svg

SVS-Vistek eco1050, User Manual

Share
Download
SVS-Vistek eco1050 User Manual Download Page 77

Users Manual – eco1050, eco2050, eco2150, eco4050, eco674, eco694, eco814 

p. 77 

 

 DANGER

 

 

If any overheating sign is observed, discontinue the use 
immediately. 
In the event that smoke, smell, or any other overheating 
sign is observed, turn the power switch of the system OFF 
immediately and remove the power cable(s) from the 
system connectors, like computer, camera, lightning. Do 
NOT try to continue to use the system. To do so in spite of 
clear signs of malfunction invites a fire, an electric shock 
hazard, or a serious damage to the system components. In 
such case, contact for repair service us or our 
dealer/distributor, from which you purchased the system. 

 

If any malfunctioning sign is observed, discontinue the use 
immediately. 
Do NOT try to use the system when it is malfunctioning. 
(Ex. No images on the monitor) In the event of malfunction, 
turn the power switch of the system OFF immediately and 
remove the system power cables from the system 
components connectors. In such case, contact for repair 
service us or our dealer/distributor from which you 
purchased the system. 

 

If any foreign object gets into the system components, 
discontinue the use immediately. 
In the event that liquids, small particles, or any other 
foreign objects get into the system components, do NOT try 
to continue to use the system. To do so invites a fire or an 
electric shock hazard. In that case, turn the power switch of 
the system components OFF immediately and remove the 
system power cables from the system components 
connectors. After that, contact us or our dealer/distributor 
from which you purchased the camera for repair 
service/technical advice. 

 

Do NOT disassemble the system components. 
Do NOT attempt to pull apart; repair, or modify the system 
components on your own. To do so leads to a fire or an 
electric shock accident. Contact us or the dealer/distributor 
from which you purchased the camera for 
repair/modifacation. 

 

Do NOT supply any power than specified. 
The system components are designed to work only under 
specified voltage. Do NOT attempt to drive the system 
components with the power other than specified. Operating 
the system components under power other than specified 
invites a fire or a electric shock hazard. 

 

Do NOT use the system components in a high-humidity 
environment. 
Do NOT place the system components near a humidifier, or 

Summary of Contents for eco1050

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands