E
F
Dobladillo Invisible
Pour les ourlets sur les rideaux, pantalons, jupes, etc.
Ourlet invisible pour tissus extensibles.
Ourlet invisible pour tissus solides.
Régler le cadran de longueur de point dans la fourchette
indiquée sur le diagramme. Toutefois, les ourlets invisibles ne
sont normalement pas cousus avec un réglage de longueur
de point plus long. Régler le cadran de largeur de point sur un
réglage approprié pour le poids/type de tissu cousu, dans la
fourchette indiquée sur le diagramme sur la droite de la page.
En général, un point plus étroit est utilisé pour les tissus plus
légers et un point plus large est utilisé pour les tissus plus
lourds. Faire un test en premier pour assurer que les réglages
de la machine conviennent au tissu.
Ourlet invisible :
Rabattre l'ourlet à la largeur souhaitée et repasser. Replier
(comme indiqué à la fig. 1) contre le côté droit du tissu avec le
bord supérieur de l'ourlet s'allongeant d'environ 7 mm (1/4 de
pouce) sur le côté droit du tissu plié.
Commencer à coudre lentement, en assurant que l'aiguille
touche légèrement le haut plié pour attraper un ou deux fils de
tissu. (2)
Déplier le tissu une fois que l'ourlet est terminé et repasser.
Pour faciliter la couture d'ourlet invisible, utiliser un pied
pour ourlet invisible, disponible auprès de votre revendeur
SINGER . (Voir page 9 pour le numéro de pièce)
Remarque :
®
Ourlet invisible
Para dobladillos, cortinas, pantalones, faldas, etc.
Para realizar un dobladillo invisible en telas elásticas,
seleccione esta puntada.
Para realizar un dobladillo invisible o la puntada de
lencería.
Fije el selector de largo de puntada con la gama mostrada en
el diagrama. El dobladillo invisible, sin embargo, se cosen
normalmente con un ajuste más largo de la longitud de la
puntada. Cosa una prueba primero para cerciorarse de que
los ajustes de la máquina son apropiados para la tela.
Dobladillo invisible:
Dé vuelta al dobladillo hasta el ancho deseado y presione.
Coloque el lado derecho de la tela hacia arriba con el borde
del dobladillo hacia la izquierda. (Fig. 1) Comience a coser de
manera que la aguja oscile hacia el borde izquierdo de la tela
para formar un pequeño festón. Extendiéndolo cerca de 7 mm
(1/4") al derecho de la tela doblada.
Comience a coser lentamente en el doblez, cerciorándose de
que la aguja sólo tome uno o dos hilos de la tela. (2)
Retire la tela cuando se termina el dobladillar.
Para hacer el dobladillo invisible con mayor facilidad, use el
prensatelas para dobladillo invisible, disponible con tus
Distribuidor Autorizado. (Ver número de parte en la página
9)
Nota:
30