Eng
SPS-609
5. INSTALLATION AND OPERATION GUIDE
a
Power LED
b
Tone Knob
c
Volume Knob
d
Power Knob
• Before connecting be sure that all components are switched off.
• Connect master speaker and the sub one with the link cable.
• Insert mini-jack of the signal cable into the output port of the PC soundcard,
VCD output port, CD one and so on. Then connect two signal cable plugs
with master speaker output ports (match the colours).
• Plug the connector for power
• Revolve regulator knobs to the minimum; press the power button on the
front side of the master speaker.
• Adjust the volume knob to the necessary volume.
• Adjust the timbre knobs to your satisfied timbre effect.
• Use the soundcard Line-Out port to improve sound quality.
6. SPECIFICATIONS
Parameter, unit
Value
Output power, W
2 х 5
Speaker units, inch
=
3"
Impedance, Ohm
4
Magnetic shielding
yes
Voltage supply
AC220 V, 50 Hz
Frequency range, Hz
70 – 18 000
Dimensions, mm
225 х 115 х 155
Weight, kgs
2,25
Note.
The above specifications are only for reference. The design and specification are subject to change without
prior notice.
Durability — 5 years
Computer
DVD
CD
MP3-Player
Power cable
Signal
cable
Link
cable
abcd
Summary of Contents for SPS-609
Page 1: ...SPS 609...
