OPERATION OF MICROPHONE
1. If the quality of microphone sound deteriorated, replace the microphone
and receiver batteries. Also try to change the position of the receiver antenna
to achieve optimum performance.
Attention. When you first turn on the signal quality is poor, it is necessary
to conduct an accurate receiver tuning by adjusting the tuning element
a
(Fig. 1) using a small screwdriver.
2. Remove the battery when you are not planning to use the microphone for
a long time.
3. If you turn off the microphone may cause unwanted noise.
4. In case of insufficient signal quality or increase the noise level, it is
necessary to adjust the receiver using a thin dielectric screwdriver. To do this,
use a special hole
a
on the top of the device.
Attention!
• Protect the unit from direct sunlight and rain. Keep it away from
electromagnetic waves.
• Do not hold the microphone to the speaker, and to each other.
Fig. 1.
a
–
trimmer
4
ENG
Wireless Microphone