Sven E-702BT, User Manual

Page: 4 / 16

ENG
4
Wireless Stereo Headphones
with Microphone
• It is necessary to select Bluetooth device search mode on a signal source (telephone,
notebook, smartphone, etc.). «SVEN E-702BT» massage will be displayed on the screen,
which is to be connected to*.
•
If connection successful, there will be a short beep signal in the headphones; the search
mode indication on the headphones is over. If no devices connected, headphones will
turned off automatically in 2 minutes.
Note: When watching streaming video or using a wireless headset in mobile games, the
audio track may lag slightly behind the image or action. This is not a malfunction, but is
due to the technical capabilities of the source and receiver Bluetooth chips.
Case Headset Charging
•
Put the headphones to the charging case. During battery charging indicator b lights red.
When device is charged full, indicator b is white within 1 minute, then go out.
•
The battery in the headphones and case is used as an integral part of the device,
therefore do not try to extract or replace it, because this can result in the warranty
cancellation or the device damage.
Device switching on
•
Remove the headphones from the charging case and they will automatically turn on.
Make sure the headphones are charged.
Device switching off
• Put the headphones to the charging case. They will automatically turn off, or long touch
of button
a
on either headphone disconnects both headphones.
Headphone control
When connected to a telephone:
•
In order to receive an incoming call press multifunction button a . Press button a again
to finish the call.
•
Siri or Google Assistant: touch and hold any of the headphones for 2 seconds**.
•
Рlay/pause: tap any of the headphones once.
•
Next track: touch any headphones 2 times.
• Previous track: touch any headphones 3 times.
•
Reset function: tap button a on two headphones five times at the same time.
* You might have to enter «0000» code to connect some models of devices via Bluetooth.
** Availability of this feature depends on your phone.
Fig. 2. Connection diagram
PC
Headphones
Mobile device