SVBONY SV605, User Manual

Page: 3 / 33

REFACE
Thank you very much for your purchase of a SVBONY microscope
This manual applies to SV605. Read this manual before using the SV605 microscope.
Setting Up
1. Remove the Styrofoam container from the carton.
2. Carefully remove the microscope and other parts from the container and set them on a table, desk, or other flat surface.
3 . Remove eyepieces from the plastic bags.
4. Insert the 10x eyepiece into the eyepiece tube
You are now ready to use your microscope for looking at specimen
CAUTION!
Please set the microscope on stable table, desk, or other flat surface. Away from edge.
●CARE & MAINTENANCE
1.Never leave the SV605 microscope close to fire, or hot places
2.When you are done using your microscope, remove any specimens left on the stage 3.Turn off the top and bottom illuminators when you are
done using the microscope.
4.If you will not use the microscope for a long time (30 days or more), remove the batteries. 5.Always place the dust cap over the eyepiece
when not in use or when being stored. 6.Store the microscope in a clean, dry place.
7.Clean the outside surfaces with a damp cloth.
8.Never clean optical surfaces with cloth or paper towels as they can scratch optical surfaces easily.
9.To remove fingerprints from optical surfaces, use a lens cleaning agent and lens tissue available at most photo outlets.
10. Never disassemble or clean internal optical surfaces. This should only be done by qualified technicians at the factory or other authorized
repair facilities.
OVERVIEW
Binocular wide-angle eyepiece
Interpupillary distance adjustment lever
Metal curved frame
LED light source
Specimen moving calipers
Coaxial coarse focusing wheel
Coaxial fine focusing whee
Brightness adjustment knob
ABS binocular head
360 eyepiece rotating base
Three-hole converter
Objective lens group
Square stage
LED light source
Metal base
1