SVBONY SV601, Manual

Page: 3 / 24

h
sil
g
n
E
PREFACE
Thank you very much for your purchase of a SVBONY microscope
This manual applies to SV601. Read this manual before using the SV601 microscope.
Setting Up
1. Remove the Styrofoam container from the carton.
2. Carefully remove the microscope and other parts from the container and set them on a table,
desk, or other flat surface.
3
.
Remove eyepieces from the plastic bags.
4. Insert the 10x eyepiece into the eyepiece tube
You are now ready to use your microscope for looking at specimen
CAUTION
Please set the microscope on stable table, desk, or other flat surface. Away from edge.
Ɣ
CARE & MAINTENANCE
1.Never leave the SV601 microscope close to fire, or hot places
2.When you are done using your microscope, remove any specimens left on the stage
3.Turn off the top and bottom illuminators when you are done using the microscope.
4.If you will not use the microscope for a long time (30 days or more), remove the batteries.
5.Always place the dust cap over the eyepiece when not in use or when being stored.
6.Store the microscope in a clean, dry place.
7.Clean the outside surfaces with a damp cloth.
8.Never clean optical surfaces with cloth or paper towels as they can scratch optical surfaces
easily.
9.To remove fingerprints from optical surfaces, use a lens cleaning agent and lens tissue available
at most photo outlets.
10. Never disassemble or clean internal optical surfaces. This should only be done by qualified
technicians at the factory or other authorized repair facilities.
OVERVIEW
1
Wide Angle Eyepiece 10X/20X
2x Extender
Prism Inside
LED Light Top
Metal Structure
Fine Focuser
Coarse Focuser
6 colors filters
LED light Levels
3 levels Knob
LED Light Bottom
Stage
Mobile caliper
Objective Lens 4x 10x 40x
Objective Lens adapter
45-degree eyepiece tubetal