SVAT ELECTRONICS
now you can see
VU301-C
2
IMPORTANT INFORMATION
While this camera is weatherproof, it is not waterproof. Please do not install it in areas that receive direct rain or under eaves trough
draining spots. Do not cut the DC power cable of this camera to fit with another power source. Do not cut the video connection wire
to fit with a different video connection type. Any unauthorized modifications will void your warranty.
INSTALLATION
THINGS TO CONSIDER BEFORE YOU INSTALL YOUR CAMERA
• The camera should be installed between 8 and 13ft above the area to be monitored
• Ensure there are no obstructions in the camera’s view, to maximize viewing area
• Ensure that the sunshade is positioned to avoid glare and position camera away from direct sunlight
• Decide whether the camera will be wall-mounted or sit on a desk/table top. If wall mounting, use the mounting hardware in
the package. We recommend that the mounting bracket is secured using the included screws for all installations
• This camera comes with 60ft of video/power wire. Please make sure that you mount the cameras no more than 60ft from the
TV/monitor/VCR/DVR
• We recommend using a surge protected power bar to protect the cameras internal circuitry
STEP BY STEP
1. Screw the mounting bracket into the camera’s mounting hole,
turning it clockwise.
2. Mount the camera in the desired location no more than 60
feet from the TV/Monitor/VCR/DVR unless you have purchased
additional wiring. You may wall mount or desk mount these
cameras.
3. Adjust cameras to the desired viewing angles.
1. Plug the 4 PIN DIN female
connection on the camera into the
4 PIN DIN male connection on the
60ft video/power wire.
2. Match the two arrows on top of
both connecting cables.
1
2
MOUNTING
1
VU301C manual.indd 2
18/11/2009 3:52:52 PM
